Rapid Electric Dirt Separator

1. Rapid Electric Dirt Separator; 2. Easy installation; 3. Filtration Precision: 2mm 4. Small size, low cost, and easy mainte

Rapid Electric Dirt Separator

Rapid electric dirt separator is intended for the filtration and removalof impurities and dirt in the pipelines of heating system, in order to maintain clean water in the system, thereby reducing pipe resistance and preventing blockage. The electric dirt separator runs a flow process like this: raw water flows from the inlet into thecylinder, going through the strainer, and outflows from the port and into the system, while the dirt settles tothe bottom of the dirt separator anddischarges from the port. The rapid electric dirt separator is designed with an optimum constructionbased on the principles of fluid dynamics, with minimal operating resistance, so the dirt separator can make back flush and discharge while the system is in operation, thus ensuring the normal operation of the system. Currently,rapid electric dirt separator takes three modes of control: timing, differential pressure and manual control, and the rapid dirt separator featuring handle operation can also be supplied to user’s requirements.

Features

Easy installation; it can be directly installed on pipelines, and fit for operating in a variety of process conditions.Small size, low cost, and easy maintenance.Removable strainer for easymaintenance.Highly automatic operation for the ease of management – operation without monitoring.Back flush by using the pressure of water header, so there is no need to provide the water supply for backwash, and little pressure loss, thus reducing water usage.Widely used; it’s a practical, simple and reliable solution to ensure the safe operation of water equipment. Performance Data

Design Pressure: 1.6Mpa  

Design Temperature: 180°C

Filtration Precision: 2mm

Flange Standard: GB/T 9119

Design Flow: ≤1160m3/h  Operating Principle 

Rapid Electric Dirt Separator